Filter
Top Products
thePCandthenwritethembacktothe
card,thepicturesmaybedisplayedwith
datesdifferentfromtheactualrecording
datesincalendarplaybacketc.
• TV, PC and printer
1: The picture does not appear on the
television.
• Is the camera connected to the TV
correctly?
• Set the TV input to external input mode.
2: The display areas on the TV screen
and the camera's LCD monitor are
different.
Depending on the TV model, the area
display may be smaller so the picture
may be stretched horizontally or vertically
and the top and bottom or left and right of
the picture may be cut off when it is
displayed. This is due to the TV
specifications and is not a malfunction.
3: The motion pictures cannot be played
back on a TV.
• Are you trying to play back the motion
pictures by directly inserting the card in
the card slot of the TV?
- Connect the camera to the TV with the
AV cable (supplied) and then play back
the pictures on the camera. (P87)
4: The picture cannot be transferred
when the camera is connected to a
PC.
• Is the camera connected to the PC
correctly?
• Is the camera recognized by the PC
correctly?
5: The card is not recognized by the PC.
(The built-in memory is recognize)
• Disconnect the USB connection cable.
Connect it again while the card is
inserted in the camera.
6: The picture cannot be printed when
the camera is connected to a printer.
• Does the printer support PictBridge?
Others
-You cannot print pictures with printers
which do not support PictBridge. (P83)
• Reset the mode to [!_. (P83)
7:The ends of the pictures are cut at
printing.
• When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (For details,
refer to the operating instructions for the
printer.)
• When you order photo studios to print
pictures, ask the photo studio if the
pictures can be printed with both ends.
8:The picture is not displayed fully on
the TV.
• Set the aspect of the TV on the camera.
(P20)
• Others
1:An unreadable language was selected
by mistake.
• Press [MENU/SET], select the [SETUP]
menu icon [,_] and then select the [@'_]
icon to set the desired language. (P20)
2: The setting for the auto review
function is disabled.
• Is the camera in burst mode (P63) or
motion picture mode [_] (P52) or
[SELF PORTRAIT] (P46) in scene
mode?
- In these cases, you cannot set the auto
review function in the [SETUP] menu.
3: A red lamp sometimes turns on when
the shutter button is pressed halfway.
• In dark places, the AF assist lamp (P63)
lights red to make it easier to focus on a
subject.
97
VQT1C 14