Panasonic DMC-FX12 Camcorder User Manual


 
Advanced (Playback)
Press [_] to display the [PLAY] mode
menu and select the item to set. (P69)
Usually, it is not necessary to format the
built-in memory and the card.
Format them when the message
[BUILT-IN MEMORY ERROR] or
[MEMORY CARD ERROR] appears.
Press to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
MENU
@
When a card is not inserted, you can
format the built-in memory. When a card
is inserted, you can format the card.
If you press [MENU/SET] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
If the card has been formatted on a PC or other
equipment, format it on the camera again.
Use a battery with sufficient battery power
(P21) or the AC adaptor (DMW-AC5PP;
optional) when formatting.
Do not turn the camera off during
formatting.
It may take longer to format the built-in
memory than the card. (Max. about 15 sec.)
You cannot format an SD Memory Card or
an SDHC Memory Card when the card's
Write- Protect switch _'_,pis set to [LOCK].
If the built-in memory or the card cannot
be formatted, consult your nearest
Service Center.
80
VQT1C14