Filter
Top Products
Connecting to other equipment
• [NUM. OF PRINTS]
Set the number of prints.
*You can set up to 999 prints.
• [PAPER SIZE]
(Paper sizes that can be set with this unit)
The paper sizes are displayed on pages
1/2 and 2/2. Press • to select.
1/2
Settings on the printer are
3rioritized.
[L/3.5"x 5"] 89 mmx 127 mm
[2LI5"x7"] 127 mmx 178 mm
[POSTCARD] 100 mm×148 mm
[A4] 210 mmx297 mm
2/2
[CARD SIZE] 54 mm×85.6 mm
[10x15cm] 100 ram× 150 mm
[4"x6"] 101.6 mmx 152.4 mm
[8"x 10"] 203.2 minx264 mm
[LETTER] 216 mmx279.4 mm
+These items cannot be displayed when the
printer does not support the paper sizes.
•[PAGE LAYOUT]
(Layouts for printing that can be set with
this unit)
Settings on the printer are
3rioritized.
B 1 picture with no frame on 1 page
In7 1 picture with a frame on 1 page
_ 2 pictures on 1 page
_ 4 pictures on 1 page
AISI
• An item cannot be selected if the printer
does not support the page layout.
• Setting the date printing with the
DPOF print in advance
• We recommend setting DPOF date
printing with [DPOF PRINT] (P74) in
advance when the printer supports it. If
you select [DPOF PICTURE], printing
starts and the recording date is printed.
86
VQT1C14
• Layout printing
• When printing the same picture on 1
sheet of paper
For example, if you want to print the same
picture 4 times on 1 sheet of paper, set
[PAGE LAYOUT] to [ BUlB] and then set
[NUM. OF PRINTS] to 4 for the picture
that you want to print.
• When printing different pictures on
1 sheet of paper
For example, if you want to print 4 different
pictures on 1 sheet of paper, set
Ir4H
[PAGE LAYOUT] to [_] and then set
[COUNT] in [DPOF PRINT] (P74) to 1 for
each of the 4 pictures.
• Do not disconnect the USB connection
cable when the cable disconnection
warning icon [_':_ ] is displayed.
(Depending on the printer, the icon may
not be displayed.)
• If the remaining battery power becomes
low while the camera and the printer are
connected, the status indicator blinks and
the alarm beeps. If this happens during
printing, press [MENU/SET] and stop
printing at once. If not printing, disconnect
the USB connection cable.
• The camera is receiving an error message
from the printer when the [O] indication
lights orange during printing. After
finishing printing, make sure there are no
problems with the printer.
• If the total number of DPOF prints or the
number of DPOF pictures printed is high,
pictures may be printed several times. The
remaining number of prints indicated may
differ from the number set. This is not a
malfunction.
• With date printing, the setting on the
printer may take priority over the setting
on the camera. Check the date print
setting on the printer also.
• The message [USB MODE CHANGED.
PLEASE REMOVE THE USB CABLE.]