Filter
Top Products
117
VQT1S88
Others
> Check [TV ASPECT] setting. (P23)
• Is the camera connected to the PC correctly?
• Is the camera recognized by the PC correctly?
> Set to [PC] in [USB MODE]. (P23, 93)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
• Pictures cannot be printed using a printer which does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB MODE]. (P23, 95)
> When using a printer with a trimming or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the pictures can be
printed with both ends.
> Press [MENU/SET], select the [SETUP] menu icon [ ] and then select the [~] icon to set
the desired language. (P24)
• In dark places, the AF assist lamp (P74) lights red to make it easier to focus on a subject.
• Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]? (P74)
• The AF assist lamp does not turn on in bright places.
• The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
• When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
• If you do not use the camera for a long time, the clock may be reset.
The picture is not displayed fully on the TV.
The picture cannot be transferred when the camera is connected to a PC.
The card is not recognized by the PC. (The built-in memory is recognized.)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
Others
An unreadable language was selected by mistake.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF assist lamp does not turn on.
The camera becomes warm.
The lens clicks.
The clock is reset.
DMCFX150-VQT1S88_mst.book 117 ページ ２００８年７月９日 水曜日 午後８時１８分