Filter
Top Products
VQT1S88
70
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
³²
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
•
When it is set to [LOW], [STANDARD] or [HIGH], [ ] is displayed on the screen.
• Even when the [SENSITIVITY] is set to [ISO100], [SENSITIVITY] may be set higher than
[ISO100] if the picture is taken with [I.EXPOSURE].
• Compensation effect may not be achieved depending on the conditions.
• [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
For details on [REC] mode menu settings, refer to P18.
Using this function, you can achieve the kind of effect that is obtained when an image is
exposed two or three times.
Applicable modes:
³²
1 Select [START] and then press [MENU/SET].
2 Decide on the composition, and take
the first picture.
•
After taking the picture, press the shutter button halfway down to
take the next picture.
• Press 3/4 to select the item and then press [MENU/SET] for one of
the following operations.
3 Decide on the composition, and take the second picture.
•
After taking the picture, the first and second pictures taken will be
superimposed over each other and displayed.
• After taking the picture, press the shutter button halfway down to
take the next picture.
• Press 3/4 to select the item and then press [MENU/SET] for one of
the following operations.
[I.EXPOSURE]
[MULTI EXPO.]
[NEXT]: Advance to the next picture.
[RETAKE]: Return to the first picture.
[EXIT]: Record the image of the first picture, and finish the multiple
exposure picture-taking session.
[NEXT]: Advance to the next picture.
[RETAKE]: Return to the second picture.
[EXIT]: Record images up to the second picture taken, and finish the
multiple exposure picture-taking session.
VQT1S88~Body2_mst.fm 70 ページ ２００８年７月１０日 木曜日 午後４時２分