Filter
Top Products
63
VQT1S88
Advanced (Recording pictures)
Note
•
The ends of the recorded pictures may be cut at printing so check before printing. (P117)
For details on [REC] mode menu settings, refer to P18.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
³
[OFF]/[ON]
Note
•
Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
• Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
• When [INTELLIGENT ISO] is [ON], the maximum ISO sensitivity is limited to the value set in
[ISO LIMIT SET]. When [ISO LIMIT SET] is set to [AUTO], the ISO limit is set automatically up
to a maximum of [ISO800].
For details on [REC] mode menu settings, refer to P18.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Applicable modes:
³²
[AUTO]/[100]/[200]/[400]/[800]/[1600]
Note
•
When setting to [AUTO], ISO sensitivity is automatically adjusted to the maximum of the value
set in [ISO LIMIT SET] (excluding [AUTO]).
• The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.)
• If picture noise becomes a problem, we recommend that you take pictures after lowering the
maximum ISO sensitivity level, increasing the setting for [NOISE REDUCTION] under
[PICT.ADJ.], or lowering the setting for each of the items other than [NOISE REDUCTION].
(P72)
[X][Y][W]
[INTELLIGENT ISO]
> [SENSITIVITY]
ISO sensitivity
100 1600
Recording location
(recommended)
When it is light (outdoors) When it is dark
Shutter speed Slow Fast
Noise Less Increased
DMCFX150-VQT1S88_mst.book 63 ページ ２００８年７月９日 水曜日 午後８時１８分