VQT1S88
46
Advanced (Recording pictures)
[REC] mode: ²
Taking Pictures with Exposure Set Manually
(²: Manual exposure)
Determine the exposure by manually setting the aperture value and the shutter speed.
Slide the [REC]/[PLAYBACK] selector switch to [!], and then set the
mode dial to [²].
Press
3
/
4
to select aperture or shutter
speed, and press
2
/
1
to set.
• The aperture values given in the table above are values when the zoom position is at
maximum Wide.
• Depending on the zoom magnification, some of the aperture values cannot be selected.
Press [MENU/SET].
• You can also press the shutter button halfway to finish.
Press the shutter button halfway.
• The manual exposure assistance A appears for
about 10 seconds to indicate the exposure.
• Set the aperture value and the shutter speed again
when the exposure is not adequate.
Manual setting screen is displayed when 3 is
pressed.
Take the pictures.
∫ Manual Exposure Assistance
•
Manual exposure assistance is an approximation. It is recommended to record by confirming in
playback mode.
Note
•
Brightness of the LCD monitor may differ from the actual picture recorded. Please confirm in
playback mode.
• If the exposure is not adequate, the aperture value and the shutter speed turn red when the
shutter button is pressed halfway.
Available Aperture Value
Available Shutter Speed (Sec)
(Per 1/3 EV)
F2.8 60 to 1/1300
F9.0 60 to 1/2000
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
1
2
3
A
4
5
DMCFX150-VQT1S88_mst.book 46 ページ 2008年7月9日 水曜日 午後8時18分