Filter
Top Products
71
VQT1S88
Advanced (Recording pictures)
4 Decide on the composition, and take the third picture.
•
After taking the picture, the images of the first, second and third
pictures taken will be superimposed over one another and
displayed.
• Press 3 to select [RETAKE] and then press [MENU/SET] to
return to the third picture.
5 Press 4 to select [EXIT] and then
press [MENU/SET].
•
You can also press the shutter button halfway to finish.
• The images up to the third picture taken are recorded, and the multiple exposure
picture-taking session will be completed.
∫ About automatic gain control setting
Select [AUTO GAIN] on the screen shown in step
1 and set it.
Note
•
The recording information displayed for pictures taken with multiple exposures is the recording
information for the last picture taken.
• If [MENU/SET] is pressed while taking pictures, the photographed images are recorded, and
the multiple exposure picture-taking session will be completed.
• Image is not recorded until completion.
• Some functions have restrictions. You will not be able to use the following functions:
– Burst mode/[AUTO BRACKET]/[COLOR BRACKET]/Extended optical zoom/Digital zoom/
[I.EXPOSURE]/[AUDIO REC.]
• We recommend using a tripod if taking pictures with multiple exposures.
• The multiple exposure setting is released at the following times:
– When the power has been turned off
– When the card has been changed
– When the USB connection cable has been connected to the camera
– When the camera has been switched from [REC] mode to playback mode
– When the position of the mode dial has been changed
• [PICTURE SIZE] is fixed when [START] is selected.
• The zoom position and white balance are fixed when the first picture is taken.
For details on [REC] mode menu settings, refer to P18.
This can enlarge subjects even more than the optical zoom or extended optical zoom.
Applicable modes:
³²¿n
[OFF]/[ON]
Note
•
Refer to P31 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [AUTO] or [MODE 1].
[ON]: The brightness level is adjusted according to the number of pictures taken
and the pictures are superimposed over each other.
[OFF]: Compensate the exposure to match the subject so that all the superimposed
exposure effects will be just right.
) [DIGITAL ZOOM]
DMCFX150-VQT1S88_mst.book 71 ページ ２００８年７月９日 水曜日 午後８時１８分