VQT1Y62
12
Before Use
How to Use the Touch Panel
You can operate by directly touching the LCD monitor (touch panel) with your finger.
It is easier to use the stylus pen (supplied) for detailed operation such as title editing or if it
is hard to operate with your fingers.
Note
• This touch panel detects pressure. Touch a little stronger if
you have a commercially available protection sheet affixed.
• If you use a commercially available liquid crystal protection
sheet, please follow the instructions that accompany the
sheet. (Some liquid crystal protection sheets may impair
visibility or operability.)
• Touch panel will not operate if the hand holding the unit is
touching the touch panel.
• Do not press on the
LCD monitor with hard pointed tips,
such as ball point pens.
• Do not operate with your fingernails.
• Wipe the LCD monitor with dry soft cloth when it gets dirty.
• Do not scratch or press the LCD monitor too hard.
• Only use the supplied
stylus pen.
• Do not place it where small children can reach.
• Do not place the
stylus pen on the LCD monitor when
storing. LCD monitor may break when the
stylus pen is
pressed strongly against the LCD monitor.
∫ Touch
To touch and release the touch panel.
It is used to select icon or picture.
• It may not operate properly when multiple icons are touched
simultaneously, so try to touch the center of the icon.
∫ Drag
A movement performed without releasing the touch panel.
It is used to change the range of displayed picture, or
switch the screen with the scroll bar.
• If you select the wrong icon, you can drag to the correct icon,
and release your finger.
About the Stylus pen
DMC-FX580PPC_mst.book 12 ページ 2009年1月15日 木曜日 午後5時47分