VQT1Y62
62
Advanced (Recording pictures)
This is a convenient mode for shooting rapid movement or a decisive moment.
∫ Picture size and aspect ratio
1 Touch [SPEED PRIORITY] or [IMAGE PRIORITY].
2 Touch the picture size and aspect ratio to select.
• 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
3 Take pictures.
• Still pictures are taken continuously while the shutter button is pressed fully.
• The burst speed changes according to the recording conditions.
• The number of burst recording pictures are limited by the picture-taking conditions and the type
and/or status of the card used.
• The number of burst recording pictures increase immediately after formatting.
Note
• The flash setting is fixed to [Œ].
• [QUALITY] is automatically fixed to [›].
• You can take pictures suitable for 4qk6q/10k15 cm printing.
• The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶.
• The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
• The ISO sensitivity is automatically adjusted. Note, however, that the ISO sensitivity is set high
to achieve a high shutter speed.
• Depending on the operating conditions, it may take time to take the next picture if you repeat
taking a picture.
Still pictures are taken continuously with flash. It is convenient to take continuous still
pictures in dark places.
∫ Picture size and aspect ratio
1 Touch the picture size and aspect ratio to select.
• 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
2 Take pictures.
• Still pictures are taken continuously while the shutter button is pressed fully.
Note
• [QUALITY] is automatically fixed to [›].
• You can take pictures suitable for 4qk6q/10k15 cm printing.
• The shutter speed becomes 1/30th of a second to 1/2000th of a second.
• The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶.
• The focus, zoom, exposure, shutter speed, ISO sensitivity, and flash level are fixed to the
settings for the first picture.
• [INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO3200].
• See the Note on P46 when using the flash.
ô [HI-SPEED BURST]
Maximum Burst speed
approx. 10 pictures/second (Speed priority)
approx. 6 pictures/second (Image priority)
Number of recordable
pictures
approx. 15 to 100
[FLASH BURST]
Number of recordable
pictures
max. 5 pictures
DMC-FX580PPC_mst.book 62 ページ 2009年1月15日 木曜日 午後5時47分