Filter
Top Products
27
VQT1Y62
Preparation
• Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) and DC
coupler (DMW-DCC4; optional) when formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.
• If the card has been formatted on a PC or other equipment, format it on the camera again.
• It may take longer to format the built-in memory than the card.
• If the built-in memory or the card cannot be formatted, consult your nearest Service Center.
• Calibration is not done if correct position is not touched. Touch the [
i] mark again.
•
If you set a different language by mistake, select [
~
] from the menu icons to set the desired language.
• In Playback Mode, [JITTER, SUBJ. MOVE DEMO.] cannot be displayed.
•
Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.]. Press [MENU/SET] to close [AUTO DEMO].
• [JITTER, SUBJ. MOVE DEMO.] is an approximation.
• [AUTO DEMO] has no TV output capability even when it is in Playback Mode.
[FORMAT]
The built-in memory or card is formatted.
Formatting irretrievably
deletes all the data so check the data carefully before formatting.
[CALIBRATION]
Adjust the position of the touch panel if a different item gets selected
from what you touched or touch operation does not respond.
1 Press [MENU/SET].
2 Touch the orange [r] mark
displayed on the screen in
order with the stylus pen
(supplied) (5 places).
• A message is displayed once the
position is set.
3 Press [MENU/SET] to finish.
~ [LANGUAGE]
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH]
¢
/[FRANÇAIS]
¢
/[ESPAÑOL]/
[ITALIANO]
¢
/[繁體中文]
¢
/[¢]
¢
¢ Not displayed on DMC-FX580P
[DEMO MODE]
The camera automatically detects jitter and the movement of the
subject and displays these on the indicator. ([JITTER, SUBJ.
MOVE DEMO.])
The camera’s features are displayed as slide shows. ([AUTO DEMO])
[JITTER, SUBJ. MOVE DEMO.]
A Jitter detection demonstration
B Movement detection demonstration
[AUTO DEMO]:
[OFF]
[ON]
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
DEMO
A
B
DMC-FX580PPC_mst.book 27 ページ ２００９年１月１５日 木曜日 午後５時４７分