Filter
Top Products
75
VQT1Y62
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P21.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
³±
[OFF]/[ON]
Note
• Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
•
Movements may not be detected when a moving subject is small, when a moving subject is at the edge of the
screen or when a subject has moved at the very moment when the shutter button was pressed fully.
• When [INTELLIGENT ISO] is [ON], the maximum ISO sensitivity is limited to the value set in
[ISO LIMIT SET]. When [ISO LIMIT SET] is set to [AUTO], the ISO limit is set automatically up
to a maximum of [ISO1600].
For details on [REC] mode menu settings, refer to P21.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables
pictures to be taken even in dark places without the resulting pictures coming out dark.
Applicable modes: ³±´²
[AUTO]/[80]/[100]/[200]/[400]/[800]/[1600]
Note
• When setting to [AUTO], ISO sensitivity is automatically adjusted to the maximum of the value
set in [ISO LIMIT SET] (excluding [AUTO]).
• The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.)
• If picture noise becomes a problem, we recommend that you take pictures after lowering the
ISO sensitivity level, increasing the setting for [NOISE REDUCTION] under [PICT.ADJ.], or
lowering the setting for each of the items other than [NOISE REDUCTION]. (P81)
For details on [REC] mode menu settings, refer to P21.
Most appropriate sensitivity within the range set will be set depending on the brightness of the subject.
Applicable modes: ³±´²
[AUTO]/[200]/[400]/[800]/[1600]
• The upper limit of the ISO sensitivity can be set.
• The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
Note
•
This will work when the [SENSITIVITY] is set to [AUTO] or when the Intelligent ISO is set to [ON].
• When [SENSITIVITY] is set to [AUTO], and [ISO LIMIT SET] is set to [AUTO], the ISO
sensitivity is automatically set to a maximum of [ISO400] ([ISO1000] when the flash is used)
according to the brightness.
[INTELLIGENT ISO]
> [SENSITIVITY]
ISO sensitivity
80 1600
Recording location (recommended) When it is light (outdoors) When it is dark
Shutter speed Slow Fast
Noise Less Increased
[ISO LIMIT SET]
DMC-FX580PPC_mst.book 75 ページ ２００９年１月１５日 木曜日 午後５時４７分