Filter
Top Products
Recording pictures (basic)
39
VQT0R57
Taking Pictures with the Self-timer
1 Select the self-timer mode.
: Self-timer set to 10 seconds
;
: Self-timer set to 2 seconds
;
No display: cancelled
2 Take the picture.
• A: Press the shutter button halfway to
focus.
• B: Press the shutter button fully to take
the picture.
• The self-timer indicator
C blinks and the
shutter is activated
after 10 seconds (or
2 seconds).
• If you press the
[MENU] button when the self-timer is
set, the self-timer setting is cancelled.
• When using a tripod or in other cases,
setting the self-timer to 2 seconds is a
convenient way to avoid the jitter caused
by pressing the shutter button.
• When you press the shutter button fully
with one stroke, the subject is
automatically focused just before the
recording. In dark places, the self-timer
indicator blinks and then it may turn on
brightly to work as the AF assist lamp
(P67) for focusing on the subject.
• In simple mode [ ], the self-timer is fixed
to 10 seconds.
• In [SELF PORTRAIT] in scene mode
(P53), the self-timer is fixed to 2 seconds.
• When you set the self-timer in the burst
mode, the camera starts taking a picture 2
or 10 seconds after the shutter button is
pressed. The number of pictures taken at
a time is fixed to 3.
• We recommend using a tripod when
recording with the self-timer.
(When you use a tripod, make sure the
tripod is stable with the camera attached
to it.)
3
CANCEL
MENU
3
VQT0R57ENG.book 39 ページ ２００５年５月２４日 火曜日 午前８時２０分