Filter
Top Products
Recording Menu Settings
68
VQT0R57
[REC] mode menu (Refer to P61 for the setting method.)
• Be sure of the following points when the
AF assist lamp is in use.
– Do not look into the AF assist lamp.
– Do not cover the AF assist lamp with
your fingers or other objects.
• In simple mode [ ], the setting on the
[AF ASSIST LAMP] is fixed to [ON].
• You cannot use the AF assist lamp in
[SCENERY], [NIGHT SCENERY],
[FIREWORKS] and [SELF PORTRAIT] in
scene mode. (P53)
• When you do not want to use the AF
assist lamp (e.g. when you take a picture
of a subject in a dark place), set the [AF
ASSIST LAMP] to [OFF]. In this case, it
becomes difficult to focus on the subject.
• When the AF assist lamp is turned on, an
AF area with a size wider than usual
normal AF area is indicated and the area
is set only to a point on the centre of the
screen. (P67)
The shutter speed can be automatically
adjusted. However, if you want brighter
pictures, you can manually select a slower
shutter speed. This is especially effective if
you want to take pictures where both the
night landscape and the subject are bright,
using [NIGHT PORTRAIT] in scene mode
(P53).
The slow shutter speed values you can
select are: [1/8– ], [1/4– ], [1/2 –] and [1– ].
∫ Example
• Usually, set to [1/8 –] to take pictures.
(When you select slow shutter speed
values other than [1/8– ], [ ] appears
on the lower left of the LCD monitor.)
• When the shutter speed is made slower
using [SLOW SHUTTER], jitter is likely to
occur. We recommend using a tripod and
the self-timer (P39) for taking pictures.
• You cannot set the slow shutter in
[NIGHT SCENERY] and [FIREWORKS] in
scene mode. (P53)
Slow Shutter
[SLOW SHUTTER]
Slow shutter
setting
1/8– 1–
Brightness Darker Brighter
Jitter Less More
1/8– 1–
VQT0R57ENG.book 68 ページ ２００５年５月２４日 火曜日 午前８時２０分