Filter
Top Products
- 209 -
Others
[A folder cannot be created]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
> Format the card after saving necessary data on a PC etc. (P68) If you execute [No.Reset] in the
[Setup] menu after formatting, the folder number is reset to 100. (P64)
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect. (P66)
•This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P183, 188)
(DMC-FZ200)
[Editing operation cannot proceed as information processing is ongoing.]
When a card with pictures deleted or file names changed using a PC or other device is
inserted into this unit, it will automatically retrieve new information and reconstruct the burst
groups. The currently retrieving information icon [ ] may be displayed in the playback
screen for long period of time when there are many image files, and deletion or [Playback]
menu cannot be used during this time.
•
If you turn this unit off while information is being retrieved, the pictures for which information was
retrieved up to that point will be saved as a burst group. When you switch on again, the information
retrieval will restart from the same point.
[Recording failed.]
•
You may not record when the recording location is too dark/too bright, or if the subject does not
have enough contrast when recording in 3D.
[This battery cannot be used]
•
Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic
battery is used, contact the dealer or Panasonic.
•If the battery terminal is dirty, clean it and remove any objects.
(DMC-FZ200)
[Please make sure to turn on the power of external microphone.]
•
When attaching the stereo microphone (DMW-MS1: optional), check the battery status and make
sure the power is on before use. (P198)