Filter
Top Products
- 68 -
Basic
•Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn
the camera off during formatting.
•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the
card.
•If the card has been formatted on a PC or other equipment, format it on the camera again.
•It may take longer to format the built-in memory than the card.
•If you cannot format, contact the dealer or Panasonic.
•If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
•The Stabilizer function is switched between ON and OFF every time [MENU/SET] is pressed during
the [Stabilizer Demo.].
•[Stabilizer Demo.] is an approximation.
•[Auto Demo] is not output to the television.
•Press [MENU/SET] to close [Auto Demo].
[Format]
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
[Language]
Set the language displayed on the screen.
[Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera’s features are displayed as slide shows.
([Auto Demo])
[Stabilizer Demo.]
A Amount of jitter
B Amount of jitter after correction
[Auto Demo]:
[ON]/[OFF]
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
A B