Filter
Top Products
15
Charging the Battery
1
Set the power switch to [OFF].
2
Insert the battery into the
camera. (P14)
3
Open the terminal door.
A: How to open the terminal door
4
Insert the connection plug of the AC
adaptor into the DC IN socket of the
camera.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
5
Plug the AC adaptor into the
electrical outlet.
• The green status indicator
1
blinks
and charging starts.
6
When the
status indicator
stops
blinking, charging is complete.
• After charging is finished, remove the
AC adaptor from the electrical outlet
and then remove the connecting plug
from the DC IN socket.
ª
Battery indicator
The remaining battery power is displayed on the LCD monitor. (This is not
displayed when using AC adaptor)
: The battery power is sufficient
: The remaining power is a little low
: The remaining power is low
: Replace or recharge the battery