Filter
Top Products
81
Setting up the Power Save Mode
When setting this mode, the camera, if it is
not operated for certain amount time, it is
automatically turned off.
1
Press the [MENU] button.
2
Press 1 to open the setup menu
.
3
Press 3/4 to select [POWER
SAVE]
.
4
Press 2/1 to
choose
the
setting
time.
• You can choose among [2 MIN.], [5
MIN.] and [10 MIN.].
• If selecting [OFF], the power is not
turned off automatically.
5
Press the [MENU] button.
• The menu will disappear.
• If you want to cancel the power save mode, turn the power switch to [ON]
again after turning it to [OFF], or press the shutter button.
• When using the AC adaptor, the power save mode is not available.
• In power save mode, or if the battery charge is low and you have to charge it,
turn the camera off and connect the AC adaptor to the camera DC IN socket.
If connecting the AC adaptor when the power switch is set to [ON], the
camera may not function correctly.
REC
SETUP
MONITOR
AUTO REVIEW
BEEP
POWER SAVE
NO. RESET
CLOCK SET
SELECT: SET
EXIT
2 MIN. 5 MIN.