30
Recording Motion Images
With this camera you can also record motion
images. (If using the supplied 32MB SD
memory card, it is possible to record for about
160 seconds)
[Preparations]
• Insert the card. (P17)
• Set the power switch to [ON]. (P19)
• Set the operational mode dial to single
mode [ ]. (P25)
1
Set the REC mode dial to motion
image mode [ ].
2
Center the subject in the focus area
on the LCD monitor and press the
shutter button halfway.
• When the focus is adjusted, the focus
indication [
¥
] appears. (
1
AF target)
3
By pressing the shutter button fully,
the recording starts.
• The audio REC starts simultaneously.
4
By pressing the shutter button fully
again, recording stops.
• If during the recording the memory of
the card becomes full, the recording
is stopped automatically.
ª
Available settings in motion image
mode
• Macro mode (P55)
• Manual focus (P57)
• Conversion (P58)
ª
The settings that can be fixed in
motion image mode
• Picture size (P37)
• Built-in flash (P33)
• White balance (P50)
• Metering mode (P48)
• ISO sensitivity (P52)
• The remaining time displayed on the LCD monitor is an approximation.
• It is not possible to record motion images without audio.
• If using the MultiMediaCard, after recording motion images, the screen may appear
grey, but this is not a malfunction.
• When recording starts, the auto focus and zoom are locked (with the first frame).
• Except with the supplied card (e.g. MultiMediaCard), when recording motion images, it
could happen that the recording suddenly stops.
M
S
A
P
135S