Filter
Top Products
29
Checking the Last Picture (Review)
After taking a picture, when auto review
(P79) is set to [ON], the captured picture is
displayed on the LCD monitor for about 2
seconds, but you can also check the
picture by following the methods shown
below.
1
After taking a picture, press the
[REVIEW/SET] button.
• The last captured picture is displayed
for about 3 seconds. If you press the
[REVIEW/SET] button again, the
captured picture is zoomed 4 times
(
A)
and 8 times if you press once
again.
ª
Erasing the captured picture during
the review
2
Press the [MENU] button.
3
When the message [DELETE THIS
PICTURE?] is displayed, press
3
/
4
to select [YES].
4
Press the [REVIEW/SET]
button.
• The picture is erased.
• Once erased, pictures cannot be
recovered.
• When using the burst mode [ ], you
can see only the first picture with the
review.
• In motion image mode [ ], the review
cannot be used.
• When you turn the power switch to [OFF]
or change the setting of the REC mode
dial and operational mode dial, the
review cannot be displayed.
REVIEW
REVIEW
DELETE
DELETE
DELETE THIS
DELETE THIS PICTURE?
NO
YES
SELECT
:
SET
: