Panasonic DMC-TZ3 Camcorder User Manual


 
94 VQT1B61
Others
6
Specifications
Digital Camera: Information for your safety
Power Source DC 5.1 V
Power Consumption
When recording: 1.7 W (DMC-TZ3)/1.4 W (DMC-TZ2)
When playing back: 0.8 W
Camera effective pixels
DMC-TZ3: 7,200,000 pixels DMC-TZ2: 6,000,000 pixels
Image sensor DMC-TZ3: 1/2.35” CCD, total pixel number 8,500,000 pixels
DMC-TZ2: 1/2.33” CCD, total pixel number 7,390,000 pixels
Primary color filter
Lens Optical 10 x zoom
f=4.6 mm to 46 mm (35 mm film camera equivalent: 28 mm to 280 mm)/F3.3 to F4.9
Digital zoom Max.4 x
Extended optical zoom Max. 15 x (DMC-TZ3)/Max. 13.8 x (DMC-TZ2)
Focus Normal/Macro
9-area-focusing/3-area-focusing (High speed)/
1-area-focusing (High speed)/1-area-focusing/Spot-focusing
Focus range
Normal 50 cm (1.64 feet) (Wide)/2 m (6.56 feet) (Tele) to
Macro/Simple/Motion picture/
Intelligent ISO/Clipboard
5 cm (0.16 feet) (Wide)/ 1 m (3.28 feet) (Tele) to
(2 m (6.56 feet) unless max.T)
Scene mode There may be difference in above settings.
Shutter system Electronic shutter + Mechanical shutter
Motion picture recording 848 × 480 pixels*/640 × 480 pixels* /320 × 240 pixels
(*Only when using an SD Memory Card)
(30 or 10 frames/second with audio. The maximum recording time depends
on the capacity of the built-in memory or the card.)
Burst recording
Burst speed DMC-TZ3:
3 frames/second (High speed), 2 frames/second (Low speed),
Approx. 2 frames/second (Unlimited)
DMC-TZ2:
Approx. 2 frames/second (Unlimited)
Number of recordable
pictures
DMC-TZ3:
Max. 7 frames (Standard), max. 5 frames (Fine),
Depends on the remaining capacity of the built-in memory or the card (Unlimited).
DMC-TZ2:
Depends on the remaining capacity of the built-in memory or the card.
ISO sensitivity AUTO/100/200/400/800/1250
[HIGH SENS.] mode: 3200
Shutter speed 8 to 1/2000th
[STARRY SKY] mode: 15 seconds, 30 seconds, 60 seconds
Motion picture mode: 1/30th to 1/20000th
White balance AUTO/Daylight/Cloudy/Shade/Halogen/White set
Exposure (AE) AUTO (Program AE)
Exposure compensation (1/3 EV Step, -2 EV to +2 EV)
Metering mode Multiple/Center weighted/Spot
LCD monitor
DMC-TZ3:
3.0” low-temperature polycrystalline TFT LCD (Approx. 230,000 pixels)
(field of view ratio about 100 %)
DMC-TZ2:
2.5” low-temperature polycrystalline TFT LCD (Approx. 207,000 pixels)
(field of view ratio about 100 %)
Flash
Flash range: (ISO AUTO) Approx.60 cm (1.97 feet) to 4.2 m (13.8 feet) (Wide)
AUTO, AUTO/Red-eye reduction, Forced flash ON (Forced flash ON/
Red-eye reduction), Slow sync./Red-eye reduction, Forced OFF