Filter
Top Products
VQT4P14
Basics
Using the [Setup] menu
- 49 -
• For the setting procedures of the menu. (→42)
[Economy]
Turn off the camera or make the LCD monitor go dark while not using the camera to
minimize battery consumption.
[Auto Power Off]
Automatically shut off the camera while not in use.
■
Settings: [2MIN.] / [5MIN.] / [10MIN.] / [OFF]
●
To restore → Turn on the camera again.
●
Cannot be used in the following cases:
When using the AC adaptor (supplied), when connected to computer/printer, during
motion picture recording/playback, during Slide Shows
●
Settings fixed to [5MIN.] in [Intelligent Auto] Mode.
[Monitor Power Save]
The LCD monitor goes dark to minimize power consumption.
■
Settings: [ON] / [OFF]
●
Reduces the picture quality of the LCD monitor display during recording to minimize
battery consumption (except for the Digital Zoom area). Note, however, that there is
no effect on the recorded picture.
●
The setting in [Monitor Mode] is prioritized over the setting in [Monitor Power Save]
for the brightness of the LCD monitor.
[Auto Review]
Automatically display still pictures immediately after taking them.
■
Settings
[1SEC] / [2SEC]: Displays the playback screen for a preset time and then automatically
returns to the recording screen
[HOLD]: Auto review screen remains until a button (other than the [DISP.] button) is
pressed
[OFF]
●
The following cases are fixed to the settings indicated below.
• [Intelligent Auto] Mode: [2SEC]
●
Automatically displays still pictures immediately after they are taken with [Auto
Bracket] and [Burst], regardless of the [Auto Review] setting.
●
Motion pictures cannot be automatically reviewed.