Panasonic HC-V500 Camcorder User Manual


 
138
VQT3W31
It is not a malfunction in following cases
Others
Troubleshooting
A clicking sound is
heard when the unit is
shaken.
This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned
on and change the mode to or .
Object seems to be
warped.
Object seems to be warped slightly when the object
moves across the image very fast, but this is because the
unit is using MOS for the image sensor. This is not a
malfunction.
White round spots like
soap bubbles appear on
the recorded picture.
If you take a picture with
the Photo light in a dark
place or indoors, white
round spots may appear
on the picture caused by
the Photo light reflecting
of particles of dust in the
air. This is not a malfunction.
A characteristic of this is that the number of round spots
and their position differ in every picture.
Power
Problem Check points
This unit cannot be
turned on.
This unit does not stay
on long enough.
Battery runs down
quickly.
Charge the battery again to ensure it is sufficiently
charged. (l 21)
In cold places, the battery using time becomes shorter.
The battery has a limited life. If the operating time is still
too short even after the battery is fully charged, the
battery has worn out and needs to be replaced.
This unit is turned off
automatically.
If the unit turns off when you turn off the power to the TV
using the TV remote control, the VIERA Link is at work. If
you are not using the VIERA Link, set [VIERA Link] to
[OFF]. (l 105)
When this unit is connected to a DVD burner to copy or
play back images (a disc is being accessed), the unit
turns off automatically if the USB Connection Cable is
removed.
HC-V500&V500M-P&PC&PU-VQT3W31_mst.book 138 ページ 2012年1月16日 月曜日 午前11時21分