![](http://pdfasset.owneriq.net/d/54/d543c368-d84d-489d-8535-4dee25241078/d543c368-d84d-489d-8535-4dee25241078-bg2d.png)
45
VQT3W31
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in Quick Start Standby Mode about 70% of the power used in recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick Start will not work if there is no SD card inserted.
≥
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥ Change the mode to or .
1 Set [QUICK START] to [ON].
2 Close the LCD monitor.
The status indicator A flashes green and the unit goes into
Quick Start standby mode.
≥ The lens cover does not close.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
≥ Quick Start Standby Mode is canceled if
jabout 5 minutes have elapsed
jmode is set to
≥ Depending on the recording conditions and menu settings, time for Quick Start may be
longer than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (l 44)/[ECONOMY (AC)] (l 44), close the LCD monitor once and open it again.
≥ Turn the unit off using the power button.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 136)
[QUICK START]
[ON]/[OFF]
[ALERT SOUND]
/ /[OFF]
(Volume low)/ (Volume high)
HC-V500
HC-V500M
HC-V500&V500M-P&PC&PU-VQT3W31_mst.book 45 ページ 2012年1月16日 月曜日 午前11時21分