Panasonic HC-V500 Camcorder User Manual


 
28
VQT3W31
To display the Touch Menu
Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1 Select the menu. (l 41)
2 Touch the date or time to be set, then set the desired value using /
.
A Displaying the World time setting (l 42):
[HOME]/ [DESTINATION]
The year can be set between 2000 and 2039.
The 12-hour system is used to display the time.
3 Touch [ENTER].
A message prompting for World Time setting may be
displayed. Perform the World Time setting by touching the screen. (l 42)
Touch [EXIT] to complete the setting.
The date and time function is driven by a built-in lithium battery.
If the time display becomes [- -], the built-in lithium battery needs to be charged. To
recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this
unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and
time for approx. 4 months. (The battery is still being recharged even if the unit is off.)
Display of the Touch Menu will disappear when no
touch operation is performed for a specific period
of time. To display it again, touch .
Preparation
Setting date and time
: [SETUP] # [CLOCK SET]
MENU
HC-V500&V500M-P&PC&PU-VQT3W31_mst.book 28 ページ 2012年1月16日 月曜日 午前11時21分