Filter
Top Products
142
VQT3W31
∫ If AVCHD scenes do not change smoothly when played back on
another device
The images may be still for several seconds at the joins between the scenes if the following
operations are performed when multiple scenes have been continuously played back using
another unit.
≥ Just how smoothly the scenes will be played back depends on the playback unit.
Depending on the unit used, the images may stop moving and become still for a moment
even when none of the following conditions are applicable.
≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at
every 4 GB of data when played back with another device.
≥ It may not play back smoothly when the editing of scenes was done with the HD Writer AE
4.0, but it will play back smoothly if you set the seamless settings in the HD Writer AE 4.0.
Refer to the operating instructions for the HD Writer AE 4.0.
Cannot see the PDF
operating instructions
for HD Writer AE 4.0.
≥ You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for HD Writer AE 4.0.
Others
Problem Check points
If the SD card is inserted
in this unit, it is not
recognized.
≥ If the SD card is formatted on a PC, it may not be
recognized by this unit. Use this unit to format SD cards.
(l 48)
Principal reasons for not playing back smoothly
≥ When the scenes were recorded on different dates
≥ When scenes lasting under 3 seconds have been recorded
≥ When PRE-REC was used for recording
≥ When deleting scenes
≥ When selected scenes are copied between an SD card and the built-in memory
≥ When selected scenes are copied to a disc in a connected DVD burner
≥ When scenes recorded with more than 99 scenes on the same date
With a PC
Problem Check points
HC-V500&V500M-P&PC&PU-VQT3W31_mst.book 142 ページ ２０１２年１月１６日 月曜日 午前１１時２１分