Panasonic HC-V500 Camcorder User Manual


 
140
VQT3W31
Color balance of images
is strange when
recording in a place
such as a gymnasium.
In a place with multiple light sources, such as a
gymnasium or a hall, set the White Balance setting to
(Indoor mode 2). If you cannot record clearly with the
(Indoor mode 2), set it to (Manual adjustment
mode). (l 78)
Color or brightness of
the image changes, or
you may see horizontal
bars in the image.
The LCD monitor flickers
indoors.
Color or brightness of the image may change, or you may
see horizontal bars in the image when the object is
recorded under fluorescent light, mercury light or sodium
light, etc., but this is not a malfunction.
In Motion Picture Recording Mode, record in Intelligent
Auto Mode or set the shutter speed to 1/60 in areas
where the power supply frequency is 60 Hz, or 1/100 in
areas of 50 Hz.
In Still Picture Recording Mode, this will not affect the
recorded image.
Playback
Problem Check points
Scenes/still pictures
cannot be played back.
Any scenes/still pictures where the thumbnails are
displayed as cannot be played back.
Scenes cannot be
deleted.
Release the protect setting. (l 98)
Any scenes/still pictures where the thumbnails are
displayed as cannot be deleted. If the scenes/still
pictures are unnecessary, format the media to erase the
data. (l 48) Please be aware that if a media is formatted
then all the data recorded on the media is erased and
cannot be recovered. Back up important data on a PC,
disc etc.
With other products
Problem Check points
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are
squeezed horizontally.
Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.
Change the [TV ASPECT] setting to match the aspect
ratio of the TV. (l 103)
Change the setting of the unit depending on the cable
connecting to the TV. (l 104)
Recording
Problem Check points
HC-V500&V500M-P&PC&PU-VQT3W31_mst.book 140 ページ 2012年1月16日 月曜日 午前11時21分