Panasonic HDC-HS100PC Camcorder User Manual


 
31
VQT1T93
[SETUP]
[CLOCK SET] (l 33)
[DISPLAY]
[DATE/TIME] (l 33)
[DATE FORMAT] (l 33)
[POWER SAVE]
[QUICK POWER ON]
*3
(l 40)
[QUICK START] (l 40)
[BEEP SOUND]
[POWER LCD] (l 35)
[LCD SET] (l 35)
[EVF SET] (l 35)
[COMPONENT OUT] (l 96)
[HDMI RESOLUTION] (l 95)
[VIERA Link] (l 97)
[TV ASPECT] (l 94)
[AV JACK]
[INITIAL SET]
[FORMAT CARD]
*3
(l 91)
[FORMAT HDD]
*4
(l 91)
[DEMO MODE]
[LANGUAGE] (l 30)
The screen indications are selected as shown
in the illustration below.
[OFF] [ON]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without
any operation, this unit automatically turns off
to save battery life.
The power save function will not activate
when:
jconnected to AC adaptor
jusing the USB for PC, DVD burner, printer
jPRE-REC is used
This allows operations such as starting and
ending recording to be signaled by a beep.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the PC or the
printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs. Check the sentence
displayed on the screen. (l 127)
NOV 15 2008
NOV 15 2008
1h30m
R 1h20m
Output from the AV/headphone output
terminal can be set to [AV OUT] or
[HEADPHONE].
[AV OUT]:
When AV cable is used
[HEADPHONE]:
When headphone is used
You will hear a buzzing sound when it is set
to [AV OUT] while using a headphone.
Set to [YES] for changing the menu settings
back to the default condition.
(Settings for [CLOCK SET], [MEDIA SELECT]
and [LANGUAGE] will not be changed.)
This item is used to start the unit
demonstration.
(Only when the mode dial is at the
position)
If [DEMO MODE] is switched [ON] when there
is no SD card inserted and while this unit is
connected to the AC adaptor, the
demonstration automatically starts. If any
operation takes place, the demonstration is
canceled. However if no operations take place
for approx. 10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or
insert an SD card.
HDCHS100P-VQT1T93_ENG.book 31 ページ 2008年7月14日 月曜日 午後1時36分