Filter
Top Products
68
VQT1T93
Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance level of the
object, when recording same object in different surroundings.
Adjust the brightness using [IRIS]. (l 72)
≥ Set the AUTO/MANUAL switch to MANUAL. (l 64)
Select the menu. (l 29)
[OFF]:
Not display
[ALWAYS]:
Constantly display
[ON ADJUST]:
Display only when [IRIS] is adjusted. (l 72)
≥ This function’s default setting is [ON ADJUST].
A Luminance display frame
B Luminance level
≥ Luminance level is displayed between [0%]
and [99%]. It will be displayed as [99% ] when
it is over 99%.
≥ When the luminance display is set to
[ALWAYS] or [ON ADJUST], luminance is
displayed while adjusting [IRIS] even if
[DISPLAY] is set to [OFF].
A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is
displayed. It is possible to determine the exposure of the whole image by looking at the distribution in
the graph.
Adjust the brightness using [IRIS]. (l 72)
≥ Set the AUTO/MANUAL switch to MANUAL. (l 64)
Select the menu. (l 29)
[OFF]:
Not display
[ALWAYS]:
Constantly display
[ON ADJUST]:
Display only when [IRIS] is adjusted. (l 72)
≥ This function’s default setting is [ON ADJUST].
∫ Example of the display
A Normal
B Dark
C Bright
≥ When the histogram display is set to [ALWAYS]
or [ON ADJUST], histogram is displayed while
adjusting [IRIS] even if [DISPLAY] is set to
[OFF].
Luminance
[ADVANCED] # [LUMINANCE] # desired
setting
50%
Histogram
[ADVANCED] # [HISTOGRAM] # desired
setting
HDCHS100P-VQT1T93_ENG.book 68 ページ ２００８年７月１４日 月曜日 午後１時３６分