Filter
Top Products
88
VQT1T93
Editing
5
Copying between SD card
and HDD
Motion pictures and still pictures recorded with this unit can be copied between an SD card inserted in
this unit and HDD.
≥ When copying to the HDD, it cannot be copied if there is not enough remaining capacity on the HDD.
≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards
following the instruction on the screen.
In this case, the last scene copied to an SD card is automatically divided to fit the space on the SD
card.
≥ If you divide the scenes (l 85), and copy by scene selection, it is possible to copy matching the
remaining capacity of the SD card or the HDD, or only the necessary parts.
∫ SD card information display
¬Select [ ] tab while the mode dial is set to . (l 74)
Select the menu. (l 29)
≥ Press the MENU button to close the indication.
∫ HDD information display
¬Select [ ] tab while the mode dial is set to . (l 74)
Select the menu. (l 29)
≥ Press the MENU button to close the indication.
≥ The 60 GB built-in HDD requires some space to store information and manage system files, so the
actual usable space is slightly less than the indicated value. The usable HDD space is generally
calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are
expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the
capacity appears to be smaller.
≥ If there is not much remaining capacity in the SD card, a confirmation message asking to copy after
deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.
1 Set the mode dial to .
≥ Use a sufficiently charged battery or the AC
adaptor.
2 Select the menu. (l 29)
(When copying from HDD to SD card)
(When copying from SD card to HDD)
Confirming remaining capacity on the copy destination
[SETUP] # [CARD STATUS] # [YES]
[SETUP] # [HDD STATUS] # [YES]
Copying
[COPY] # [] # [YES]
[COPY] # [] # [YES]
HDCHS100P-VQT1T93_ENG.book 88 ページ ２００８年７月１４日 月曜日 午後１時３６分