Filter
Top Products
36
VQT1T93
Adjust the focus by rotating the
eyepiece corrector dial.
¬Rotate the mode dial to select .
Rotate the LCD monitor towards the
lens side.
≥ Both the LCD monitor and the viewfinder are
turned on during the face-to-face recording
regardless of the position of the LCD/EVF
select switch.
≥ The image is horizontally flipped as if you see
a mirror image. (However the image recorded
is the same as a normal recording.)
≥ Record by viewing the image in the viewfinder
during the face-to-face recording.
≥ Only some indications will appear on the
screen. When [°] appears, return the
direction of the LCD monitor to normal position
and check the warning/alarm indication.
(l 127)
≥ Following settings cannot be made during the
face-to-face recording. Return the LCD monitor
to normal position before making the settings.
jPOWER LCD
jLCD SET
Adjusting the viewfinder
field of view
Recording showing the
contents to a partner
HDCHS100P-VQT1T93_ENG.book 36 ページ ２００８年７月１４日 月曜日 午後１時３６分