Filter
Top Products
60
VQT1T93
HD hi-speed burst
shooting
72 still pictures are recorded at a rate of 24 per second.
Use this function to record an object with fast movement.
≥ The Intelligent auto mode is set to [OFF]. (l 51)
1 Select the menu. (l 29)
[RECORD SETUP] # [HI-SPEED BURST] # [ON]
2 Press the button.
≥ Up to 72 still pictures can be taken in burst mode. ([ ] flashes in
red during recording.)
3 Select the setting to save with the cursor
button and press the cursor button.
[REC ALL]:
All pictures are stored.
[SELECT]:
Pictures in the selected range are stored.
[DEL ALL]:
No picture is stored.
≥ Select the thumbnail on the right bottom of the screen with the
cursor button and move the cursor button right to display the next
page.
4 (Only when the [SELECT] is selected)
Select the range of pictures that will be stored.
A Start point
*
B Finish point
* Only select the picture for start point if only 1 picture is to be
stored.
Confirmation message is displayed when [REC] is selected and the
cursor button is pressed after selecting the start point and the finish
point.
Select [YES] and press the cursor button.
Function Effect/Setting method
HDCHS100P-VQT1T93_ENG.book 60 ページ ２００８年７月１４日 月曜日 午後１時３６分