Panasonic HX-DC2 Camcorder User Manual


 
- 166 -
This unit is turned
off automatically.
To prevent battery consumption due to
forgetting to turn the unit off etc., the
economy mode function works to send the
unit into sleep mode if the unit has been on
for approximately 5 minutes (default setting)
without an operation being performed.
When the unit is in sleep mode, you can
turn on the unit by pressing any of the
buttons on the unit.
If the unit turns off when you turn off the
power to the TV using the TV remote
control, the VIERA Link is at work. If you are
not using the VIERA Link, set [VIERA Link]
to [OFF]. (l 127)
This unit cannot be
operated though it
is turned on.
This unit does not
operate normally.
Remove the battery or AC adaptor, wait
about 1 minute and then reconnect the
battery or AC adaptor. Then about 1 minute
later, turn on the unit again. (Conducting the
above operation while the media is being
accessed may damage the data on the
media.)
If normal operation is still not restored,
detach the power connected, and consult
the dealer who you purchased this unit
from.
A blinking high
temperature
warning icon
is shown, and the
unit does not turn
on.
The battery temperature or unit internal
temperature (excluding battery) rises. Wait
for the temperature to drop before using the
unit again.
Power
Problem Check points