Filter
Top Products
- 171 -
VIERA Link does
not work.
(Setting on this unit)
≥
Connect with a HDMI micro cable (optional).
(l 127)
Connect with a HDMI mini cable (optional).
(l 127)
≥ Set [VIERA Link] to [ON]. (l 127)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch
automatically, switch the input using the TV
remote control.
≥ Check the VIERA Link setting on the
connected device.
≥ Please refer to the operating instructions of
the connected device.
With a PC
Problem Check points
An error message
may appear on the
PC when you
charge the battery
by connecting the
USB cable to a PC.
≥ First disconnect the USB connection cable,
then turn on the unit and reconnect. The unit
will be recognised by the PC. To charge the
battery, first safely disconnect the USB
cable and turn off the unit. Then reconnect
the USB cable.
When connected
by the USB cable,
this unit is not
detected by the
PC.
≥ After re-inserting the SD card into the unit,
reconnect the supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 140,
152)
≥ Connect the supplied USB cable again after
restarting the PC and turning on this unit
again.
With other products
Problem Check points
HX-WA2
HX-DC2