Filter
Top Products
VQT3P35 137
CONNECTING TO A COMPUTER
USING AS A CARD READER
Mounting your camera
1 Set the camera to the card reader mode (page 135).
h The message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
h The card is recognized (mounted) as a disk, and the [CAM_SD (E:)]
icon appears in the [My Computer] window.
h The drive name (E:) may be different on your computer.
2 Select an action.
h If the [CAM_SD (E:)] window appears automatically, select the desired
procedure from the window.
3 Copy the files from your camera to the computer.
Dismounting the camera
HINT
iTo disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1 Left-click on the icon for safely removing hardware in the task tray.
h A list appears showing the devices connected to the computer’s USB
terminal.
2 Left-click on the camera drive (E:).
3 Click on the [×] button.
h The camera can now be disconnected.
h The drive name (E:) may be different on your computer.