Filter
Top Products
Operating Instructions
136
3.1.3 Displaying Alarm Logs
Displays up to 50 Alarm Logs in order of time. Old logs will be overwritten by new
one.
1. Click [Alarm Log] on Maintenance page.
2. Alarm Logs are displayed.
Note
If the camera is restarted, all alarm logs are deleted.
3.1.4 Restarting the Camera
The Restart page can restart the camera. The camera restarts by disconnecting
the power cord from the outlet and reconnecting it again.
Note
When the camera restarts, the buffered images and alarm logs will be deleted.
1. Click [Restart] on the Maintenance page.
2. Click [Restart].
• Restarting takes about 1 minute. The Top page is displayed when finished.
Item Description
New Alarm Logs • Displays the number of new alarm logs.
Date • Displays the date and time when the Alarm 1, 2, or Motion
Detect were responded.
Sensor Type • Displays the Trigger Setting (Alarm 1, 2, or Motion
Detection) on the Trigger page.
Signal Type • Displays the Alarm enable condition on the Trigger page
when selected Alarm 1 or 2.