Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 41
Basic
(1) Network (IPv4) Configures the IPv4 network settings to connect the
camera to the network (see page
43).
(2) Network (IPv6) Configures the IPv6 network settings to connect the
camera to the network (see page 48).
(3) IPsec Enables IPsec (Transport or Tunnel mode) (see page 52).
(4) UPnP Enables automatic port forwarding or shortcut to the
camera (see page
62).
(5) DynamicDNS Registers with the DynamicDNS service (see page 65).
(6) Date and Time Sets the date and time, automatic time adjustment and
adjust clock for daylight saving time settings (see page
70).
(7) Camera Sets camera name, white balance, pan/tilt range, return to
specified position and color night view settings (see page
73).
(8) Audio Sets output, volume, PC audio input timeout, input, camera
microphone sensitivity and mute during pan/tilt settings
(see page
78).
Account
(9) Administrator
*1
Sets authentication setting and administrator security (user
name and password) (see page
80).
(10) General User
*1
Sets general user security (user name and password) and
general user's access level (see page 84).
Buffer/Transfer
(11) Trigger Sets image buffer or transfer by timer or alarm or motion
detection. (See page 87, page 96 or page 107)
(12) Motion
Detection
Sets the threshold and the sensitivity (see page 120).
(13) Alarm Log Sets the information to notify the log by e-mail (see page
123).