Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 55
2.5 Encrypt the Camera Image in Transport Mode
The camera can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1. Click [IPsec] on the Setup page.
2. Click Camera in the Transport column.
• If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
Note
To display Alarm Log, set Alarm 1, Alarm 2 or Motion Detection for Trigger
Setting and check [Enable].
3. Enter each parameter in the data field.
Set to use
Alarm Log.
(See page
123)
The display shows
that the
communication is
in HTTP and any
people can access
the camera if they
have the pre-
shared key.
Set up these settings to transfer images in transport mode (see page 118).