Operating Instructions
[For assistance, please call: 1-800-272-7033] 31
• Audio features such as camera microphone sensitivity and mute during pan/tilt
can be set up on the Audio page (see page 78).
• If you are running other applications or opening multiple windows, the audio
may be interrupted or delayed.
• When the image is refreshed during any operation such as preset registration
or a web browser refresh, the volume is reset to the default (midrange)
position. Audio that was muted is enabled.
• The audio may be interrupted due to your PC's performance or network
environment. Reduce the max. bandwidth (see page
43 and page 48).
• If the camera is accessed while the PC user visits other websites, the active
microphone may pick up audio from the PC's speakers. Be careful with it.
• Talk feature cannot be used from a PC when the camera is accessed via a
proxy server.
• If you cannot listen to the audio or talk from your PC, see page 14 of the
Troubleshooting on the Setup CD-ROM.
• If you use external microphone, excessive length or poor quality microphone
cable can cause a degradation in audio quality.
• The cables for the external microphone must be less than 7 m (about 23 feet)
long.
• To talk to the camera from your PC, an external amplified speaker such as the
Panasonic RP-SPT70 or equivalent (customer-provided) must be connected
to the camera. The speaker connects to the camera with a stereo audio cable
similar to that used by your PC. Though the connector is stereo, the audio is
not.
MIC
EXTSP
For Microphone
For Speaker