Filter
Top Products
Operating Instructions
26
1.2.5 Setting Home Position/Alarm Position/Preset Button
Registering Home Position/Alarm Position
A home position or 2 alarm positions can be registered. When restarted, the
camera takes a home position. The alarm position is one that the camera turn to
when detecting alarms or motions. If the Lens Position When Triggered setting is
set (see page
98 or page 108), the camera takes an alarm position after the
External I/O detects a signal or the camera detects motions. See page 145 for the
External I/O.
Note
The digital zoom value will not be saved.
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Click the home position button or the
alarm position button.
4. Click [Save] to register, or click [Back]
and [Cancel] to cancel.
• If "Success!" is displayed, click
[Back].
Alarm
Position
Pan/Tilt
Program
Home
Position