Filter
Top Products
5.2 Before Operating the DECT Portable Station
DECT Portable Station
173
Feature Numbers
To operate certain features, you need to enter specified feature numbers (and an additional
parameter, if required).
There are two types of feature numbers as follows:
• Flexible feature number
• Fixed feature number
Fixed feature numbers cannot be changed. However, you can change the flexible numbers to other
numbers for easier use. If you want to change the numbers, consult your dealer. In this manual, the
default numbers (factory installed) are used for operations.
A flexible number is shown as (half-shaded key). Use the new programmed number if you have
changed the feature number. Write the new number in Section 6.2.1 Feature Number List
(Appendix).
Your Extension Number / DECT System Number
You can check your own extension number or/and the connected DECT System number on the
display if set to be shown by PS Programming. Refer to 5.4.2 PS Programming – Standby Display
Selection.
Tones
You will hear various tones, during or after an operation, for confirmation. Refer to 6.4.1 What is This
Tone? (Appendix).
Examples
The displays and the illustrations shown as examples are from a PS connected to the KX-TD1232.
Restrictions
Some features may be restricted at your PS under system programming. Consult your manager or
dealer.
Icon Descriptions
There are some icons which show you the feature availability, notes and action to operate the
features. For details, refer to 2.1.1 Before Operating the Telephones – Icon Descriptions
(Operation).
While operating the PS, you can easily refer to the Icons noted on the inside back cover of this
manual.