Filter
Top Products
Recording Mode
28
1 Set the [AUTO/MANUAL/AE LOCK] Switch
(31) to [MANUAL].
≥The [MNL] Indication appears.
2 Repeatedly press the [WB] Button (28) to
select a desired White Balance Mode.
≥If you hold down the [WB] Button when the
[AUTO/MANUAL/AE LOCK] Switch is set to
[MANUAL] or [AE LOCK], the Manual White
Balance Adjustment Mode (1) is set.
1) Automatic White Balance Adjustment
2) Indoor Mode (recording under incandescent
lamp) [{]
3) Outdoor Mode [z]
4) The White Balance setting that was
previously set manually [1]
To Resume Automatic Adjustment
Press the [WB] Button repeatedly until none of
the White Balance Mode Indications ([1], [z],
[{]) appear any more. Or, set the
[AUTO/MANUAL/AE LOCK] Switch to [AUTO].
ª About Black Balance Adjustment
Black Balance Adjustment is one of the functions
of the 3CCD system. It automatically adjusts the
hue of black colour in the picture. When the Black
Balance Adjustment is activated, the screen
becomes dark for a moment.
1 Adjusting the Black Balance (Blinking)
2 Adjusting the White Balance (Blinking)
3 Adjustment is completed. (Lighting)
AUTO MANUAL
AE LOCK
(31)
WB
(28)
1)
3)
2)
4)
123
Adjusting White Balance Manually
White Balance Adjustment recognizes the colour
of light and adjust so that the white colour will
become pure white. The Movie Camera
determines the hue of light that comes through
the Lens and White Balance Sensor, thereby
judging the recording condition, and selects the
closest hue setting. This function is called
Automatic White Balance Adjustment.
For light outside the functional Auto White
Balance Adjustment range, use the Manual White
Balance Adjustment Mode.
1 Set the [AUTO/MANUAL/AE LOCK] Switch
(31) to [MANUAL].
≥The [MNL] Indication appears.
2 Press the [WB] Button (28) until the [1]
Indication is displayed.
3 Point the Movie Camera at a full-screen
white subject.
4 Keep pressing [WB] Button (28) until the
[1] Indication stops flashing.
To Resume Automatic Adjustment
Press the [WB] Button repeatedly until none of
the White Balance Mode Indications ([1], [z],
[{]) appear any more. Or, set the
[AUTO/MANUAL/AE LOCK] Switch to [AUTO].
ª About White Balance Sensor
The White Balance Sensor (33) determines the
nature of the light source during recording.
≥Do not cover the White Balance Sensor with
your hand during recording because White
Balance will not function normally.
AUTO MANUAL
AE LOCK
(31)
WB
(28)
MNL
(34)
(33)
400GN.book 28 ページ ２００４年６月３日 木曜日 午後１時４９分