Filter
Top Products
Others
54
CARD LOCKED:
The write protection switch on the SD
Memory Card is set to [LOCK].
DISCONNECT USB CABLE:
You are attempting to turn the Mode Dial in
PC Mode with connecting the USB Cable to
the Movie Camera.
PC DOES NOT SUPPORT USB2.0:
In the MotionDV STUDIO Mode, your
personal computer does not support USB
2.0 Hi-Speed.
CAN NOT USE USB:
You are attempting to connect the USB
Cable while the DV Cable is connected.
CAN NOT OPERATE
(AE LOCK MODE):
You are attempting to press the
[COLOUR NIGHT VIEW] Button with
setting the [AUTO/MANUAL/AE LOCK]
Switch to [AE LOCK].
UNABLE TO WRITE
(WIDE/PRO CINEMA MODE):
You are attempting to press the
[PHOTO SHOT] Button with setting the
Wide/Pro-Cinema Function in Tape
Recording Mode.
CHANGE TO 640k480:
You are attempting to use the function to
record still pictures which is not available
unless the [PICTURE SIZE] is set to
[640k480].
PRINTER ERROR:
Check the connected printer.
THERE IS NO INK:
There is no ink. Check the connected
printer.
THERE IS NO PAPER:
There is no paper. Check the connected
printer.
Notes and Hints
ª Concerning the Power Supply
≥When the Movie Camera is used for a long time,
the Camera body becomes warm, but this is not
a malfunction.
≥If the [CHARGE] Lamp does not light up
although the Battery is attached to the AC
Adaptor, detach the Battery and reattach it.
ª Inserting/Removing the Cassette
≥In the case of using a previously recorded
Cassette, you can use the Blank Search
Function to find the position where you want to
continue recording.
≥If a new Cassette is inserted, rewind to the
beginning of the tape before starting recording.
≥When inserting the cassette, make sure it faces
in the right direction and then push it in until it
stops.
≥When the Cassette Holder is in action, do not
touch anything except the [PUSH] mark.
≥When closing the Cassette Compartment
Cover, do not get anything caught in the cover,
such as a cable of the Free Style Remote
Controller with Mic.
ª Alarm Sounds
When [BEEP SOUND] on the [INITIAL]
Sub-Menu on the [TAPE RECORDING MENU] or
the [TAPE PLAYBACK MENU] is set to [ON],
confirmation/alarm beeps are issued as follows.
1 Beep
≥When you start recording
≥When you switch the [OFF/ON] Switch from
[OFF] to [ON]
2 Beeps
≥When you pause recording
2 Beeps for 4 times
≥If you operate a wrong operation before or
during recording
ª Recording Check
≥For Recording Check, the recording speed
mode (SP/LP) must be the same as the mode
used for the recording. If different, playback
images will be distorted.
ª Frame Moving Pictures (Frame Mode)
≥It is not possible to use the Digital Effect Modes
of [EFFECT1]. (
-33-)
≥Set [REC MODE] to [NORMAL] for regular
recording.
≥When the [PICTURE SIZE] is set to
[1280k960], you cannot set to the Frame Mode.
ª Recording on a Card
≥Pictures with wide-screen format signals cannot
be copied.
≥When the colour of the screen changes or blurs,
adjust the shutter speed manually to 1/50 or
1/100.
Photoshot
≥When you record pictures in the Tape
Recording Mode, the brightness of the picture
may differ from the one recorded in the Card
Recording Mode.
≥The sound cannot be recorded.
≥The file format supported by this Movie Camera
is JPEG.
≥If [NORMAL] or [ECONOMY] is selected for
recording, mosaic-pattern noise may appear on
a playback image depending on the image
content.
400GN.book 54 ページ ２００４年６月３日 木曜日 午後１時４９分