Filter
Top Products
Before Use
9
≥When the [CHARGE] Lamp goes off,
charging is completed.
≥When charging the overdischarged battery,
the [CHARGE] Lamp blinks at first, but the
battery is charged normally. When the
temperature of the battery is too high or low,
the [CHARGE] Lamp blinks and the charging
time becomes longer than usual.
2 Attach the charged Battery to the Movie
Camera.
Disconnecting the Power Source
Set the [OFF/ON] Switch (48) to [OFF] and, while
pressing the [PUSH BATT] Button
(55), slide the
Battery or DC Input Lead upward to disconnect it.
≥For other notes concerning this item, see
-54-.
Charging Time and Available
Recording Time
A Charging Time
B Maximum Continuous Recording Time
C Intermittent Recording Time
(Intermittent Recording Time is the available
recording time with repeated recording and
stopping actions.)
“1h10min.” indicates 1 hour and 10 minutes.
≥Battery CGA-DU14 is supplied.
CGA-DU14 A 2h45min.
B 2h.(1h30min.)
C 1h.(45min.)
CGA-DU21 A 3h55min.
B 3h.(2h15min.)
C 1h30min.(1h10min.)
PUSH
BATT
O
F
F
ON
(55)
(48)
≥The times shown in the table are approximate
times. The numbers indicate the recording time
when the Viewfinder is used. The numbers in
parentheses indicate the recording time when
the LCD Monitor is used. In actual use, the
available recording time may be shorter.
≥The times shown in the table are for continuous
recording at a temperature of 25oC and humidity
of 60%. If the Battery is charged at a higher or
lower temperature, the charging time may be
longer.
≥In the following cases, the available recording
time becomes shorter.
≥You use both of Viewfinder and LCD Monitor
simultaneously when using the 0 Lux Night
View function, rotating the LCD Monitor
frontward to record yourself.
≥When you set [EVF ON/AUTO] to [ON].
≥When you use the Movie Camera with
lighting the LCD Monitor up by pressing the
[POWER LCD] Button.
≥When you use accessories applicable to the
Smart Accessory Shoe (Stereo Zoom
Microphone, Video DC Light, etc.).
The One-touch Free Style Grip Belt
ª To Use as a Grip Belt
Adjust the length of the Grip Belt to the size of
your hand.
1 Detach the end of the Grip Belt.
2 Adjust the length of the Grip Belt to the size
of your hand.
3 Reattach the Grip Belt.
400GN.book 9 ページ ２００４年６月３日 木曜日 午後１時４９分