Panasonic DMC-LZ3 Digital Camera User Manual


 
Advanced
39
VQT0U87
Taking Pictures using
the Built-in Flash
A: Photo flash
Do not cover it with your fingers or other
objects.
Switching to the appropriate flash
setting
Set the flash to match the recording.
Press 1 [ ] to switch the flash
setting.
For information about flash settings that
can be selected, refer to “Available flash
settings by recording mode” (P40).
:AUTO
The flash is automatically activated when
the recording conditions make it necessary.
: AUTO/Red-eye reduction
¢1
The flash is automatically activated when
the recording conditions make it necessary.
It is activated once before the actual
recording to reduce the red-eye
phenomenon (eyes of the subject
appearing red in the picture) and then
activated again for the actual recording.
Use this when you take pictures of
people in low lighting conditions.
: Forced ON
The flash is activated every time regardless
of the recording conditions.
Use this when your subject is back-lit
or under fluorescent light.
: Forced ON/Red-eye reduction
¢1
The flash setting is set to Forced ON/
Red-eye reduction only when you set
[PARTY] (P52) or [CANDLE LIGHT]
(P52) in scene mode.
: Slow sync./Red-eye reduction
¢1
If you take a picture with a dark background
landscape, this feature will slow the shutter
speed when the flash is activated so that
the dark background landscape will
become bright. Simultaneously it reduces
the red-eye phenomenon.
Use this when you take pictures of
people in front of a dark background.
: Forced OFF
The flash is not activated in any recording
conditions.
Use this when you take pictures in
places where the use of the flash is not
permitted.
¢1 The flash is activated twice. The
subject should not move until the
second flash is activated.
SCN1
SCN
2
VQT0U87ENG.book 39 ページ 2005年12月27日 火曜日 午後7時12分