Panasonic DMC-LZ3 Digital Camera User Manual


 
Advanced
54
VQT0U87
The optical image stabilizer function is
fixed to [OFF].
ISO sensitivity is fixed to [ISO80].
You cannot compensate the exposure or
set [AUDIO REC.] (DMC-LZ5), auto
bracket, burst mode.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P49)
This mode allows you to take a picture in
locations such as skiing resorts and
locations near snowy mountains. The
exposure and the white balance are
adjusted to make the white color of the
snow stand out.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P49)
This mode takes pictures of a baby with a
healthy complexion. When the flash is
used, the light from it is weaker than usual.
You can set the birthdays of two babies by
using [BABY1] and [BABY2].
The baby’s age can be displayed when
playing back pictures.
The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] in the CD-ROM (supplied).
(For information about printing, refer to the
separate operating instructions for PC
connection.)
Age display setting
If you want the age to be displayed, set
the birthday in advance, select
[WITH AGE] and press [MENU/SET].
If you do not want the age to be displayed,
select [WITHOUT AGE] and press
[MENU/SET].
Birthday setting
1 Press 3 4 to select [BIRTHDAY SET.]
and then press [MENU/SET].
2 When the message [PLEASE SET THE
BIRTHDAY OF THE BABY] appears,
select items (Year/Month/Day) using
2/1 and set them using 3/4.
3 Press [MENU/SET] to finish the setting.
If you select [WITH AGE] without setting
the birthday in advance, a message is
displayed. Press [MENU/SET] and set the
birthday in steps 2 and 3.
The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/
50 cm (1.64 feet) (Tele) to ]
After turning on the camera in [BABY1]/
[BABY2] in scene mode or switching to
[BABY1]/[BABY2] from other scene
modes, the age and current date and time
are displayed for about 5 seconds at the
bottom of the screen.
The age display style differs depending on
the language setting in the recording
mode.
The display style when printing may differ
slightly from the display style on the
screen.
The date of birth is displayed as
[0 month 0 day].
If the age is not properly displayed, check
the clock and birthday settings.
If the camera is set to [WITHOUTAGE],
the age is not recorded even if the time
and birthday are set. This means the age
cannot be displayed even the camera is
Snow mode
Baby mode 1/
Baby mode 2
MENU
SET
3
1
2
MENU
SET
10:00 DEC. 1.2006
9
months
10
days
BABY1
WITHOUT AGE
BIRTHDAY SET.
WITH AGE
3
SELECT SET
MENU
CANCEL
1
1
VQT0U87ENG.book 54 ページ 2005年12月27日 火曜日 午後7時12分