Filter
Top Products
Others
93
VQT0U87
– Replace them with batteries which
have sufficient capacity. (When you
use Ni-MH batteries, charge them.)
– If you leave the camera on, the
batteries will be exhausted. Turn the
camera off frequently by using power
save mode (P22), economy mode
(P22), etc.
∫ Recording
1: The picture cannot be recorded.
• Is the mode dial correctly set?
• Is there any memory remaining on the
built-in memory or the card?
– Before recording, delete some
pictures. (P34)
2: The recorded picture is whitish.
The lens is dirty.
• The picture can become whitish if there
is dirt e.g. fingerprints on the lens. If the
lens is dirty, turn on the camera, eject
the lens barrel (P10) and gently wipe
the lens surface with a soft dry cloth.
3: The recorded picture is too bright or
dark.
• Check that the exposure is correctly
compensated. (P43)
4: The subject is not focused properly.
• The focus range varies depending on
the recording mode.
Rotate the mode dial to set the proper
mode for the distance to the subject.
• Is the subject beyond the focus range of
the camera? (P25)
• Have you taken a picture with jitter?
5: The recorded picture is blurred. The
optical image stabilizer is not
effective.
• The shutter speed will become slower
and the optical image stabilizer function
may not work properly when taking
pictures especially in dark places. In
this case, we recommend holding the
camera firmly with both hands when
taking pictures. (P25) When
[SLOW SHUTTER] (P67) is set, we
recommend using a tripod and the
self-timer (P42) when taking pictures.
6: The recorded picture looks rough.
Noise appears on the picture.
• Is the ISO sensitivity high or the shutter
speed slow?
(ISO sensitivity is set to [AUTO] when
the camera is shipped. Therefore, when
taking pictures indoors etc. the ISO
sensitivity increases.)
– Decrease the ISO sensitivity. (P63)
– Set [PICT.ADJ.] to [NATURAL]. (P68)
– Take pictures in bright places.
• In [HIGH SENS.] (P55) in scene mode,
the resolution of the recorded picture
decreases slightly because of high
sensitivity processing.
This is not a malfunction.
7: Motion picture recording stops in the
middle.
• Are you using a MultiMediaCard?
– This unit does not support
MultiMediaCards.
• We recommend using a high speed SD
Memory Card with “10MB/s” or greater
displayed on the package when you set
the picture quality to [30fpsVGA].
• Depending on the type of SD Memory
Card, recording may stop in the middle.
∫ LCD monitor
1: The LCD monitor is turned off
sometimes when the camera is turned
on.
• Is the LCD monitor turned off soon after
you take pictures with the flash?
– While the flash is being charged, the
LCD monitor is turned off.
2: The LCD monitor becomes darker or
brighter for a moment.
• This phenomenon appears when you
press the shutter button halfway to set
the aperture value and does not affect
the recorded pictures.
VQT0U87ENG.book 93 ページ ２００５年１２月２７日 火曜日 午後７時１２分