Panasonic DMC-LZ3 Digital Camera User Manual


 
Before Use
4
VQT0U87
-If you see this symbol-
Care of the camera
Do not strongly shake or bump the
camera. The camera may stop operating
normally, pictures may not be recorded or
the lens may be damaged.
Sand or dust may cause the camera to
malfunction. Make sure that sand or
dust does not get into the lens or the
terminals when using the camera on a
beach etc.
Make sure that water does not get into the
camera when using it on a rainy day or on
a beach.
If water or seawater splashes on the
camera, wet a soft cloth with tap water,
wring it well and use it to wipe the
camera body carefully. Then, wipe the
camera again with a dry cloth.
About the LCD monitor
Do not press the LCD monitor with
excessive force. Uneven colors may
appear on the LCD monitor and it may
malfunction.
Condensation may form on the LCD
monitor in places with large temperature
differences. Wipe the condensation with a
soft, dry cloth.
If the camera is cold when you turn it on,
the picture on the LCD monitor will be
slightly darker than usual at first. However,
the picture will return to normal brightness
when the internal temperature of the
camera increases.
About the Lens
Do not press the lens with excessive
force.
Do not leave the camera with the lens
facing the sun as it may cause the camera
to malfunction. Also, be careful when you
leave the camera outside or near a
window.
About Condensation (When the lens
is fogged up)
Condensation occurs when the ambient
temperature or humidity changes as
described below. Be careful of
condensation since it causes lens stains,
fungus and camera malfunction.
When the camera is taken from the cold
outdoors to the warm indoors.
When the camera is taken from outside
to inside an air-conditioned car.
When cool wind from an air conditioner
etc. blows directly on the camera.
In humid places
To prevent condensation, put the camera
in a plastic bag until the temperature of
the camera is close to the ambient
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer
and ask for the correct method of
disposal.
Extremely high precision technology is
employed to produce the LCD monitor
screen. However there may be some
dark or bright spots (red, blue or green)
on the screen. This is not a malfunction.
The LCD monitor screen has more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
The spots will not be recorded on
pictures on the built-in memory or a
card.
VQT0U87ENG.book 4 ページ 2005年12月27日 火曜日 午後7時12分