Filter
Top Products
Record mode
33
LSQT0975
Recording still pictures on a card
while recording image onto a tape
You can record still pictures while recording
image onto a tape. You can also record mega
pixel still pictures.
≥Set to Tape Recording Mode.
1 Press the [PHOTO SHOT] button fully while
recording image onto a tape.
≥For the number of still pictures to be recorded
on a card, refer to
-86-.
≥When recording pictures onto a card, the
recording start/stop button is disabled.
≥You can select the picture quality for still
pictures to be recorded. (
-34-)
≥In order to record higher quality still pictures,
you must use the card recording mode.
≥When recording still pictures, hold the
Camcorder firmly with your hands and keep
your arms stationary at your side so as not to
shake the Camcorder.
ª
Select the size of still pictures to be
recorded on a card in Tape Recording
Mode
1
Set [ADVANCED] >> [PICTURE SIZE] >>
select the desired picture size.
ASPECT [16:9]/[PRO-CINEMA]:
: 1280k720
: 640k360
ASPECT [4:3]:
: 1280k960
: 640k480
Recording still pictures onto a card
(Photoshot)
≥Set to Card Recording Mode.
1 Press the [PHOTO SHOT] button halfway in
order to adjust focusing. (For auto focusing
only)
≥If you set [O.I.S.] to [ON], then the image
stabilizer function will be more effective.
([ (MEGA Optical image stabilizer)] will
be indicated.)
≥The iris/gain value is fixed and this
Camcorder focuses on the subject
automatically.
1 Shutter chance mark
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark: When focusing is unsuccessful
≥The shutter chance mark is indicated as follows
when the [PHOTO SHOT] button is not pressed
halfway. Please use it as a guide for recording.
¥ (The green lamp lights up.):
When in focus and a good picture
can be recorded
± (The white lamp lights up.):
Almost in focus
2 Focus area
2 Press the [PHOTO SHOT] button fully.
PHOTO SHOT
1
0.2
1
M
0.3
M
PC
MEGA
PHOTO SHOT
1
2
LSQT0975_ENG.book 33 ページ ２００５年１２月１９日 月曜日 午前９時５１分