Filter
Top Products
Record mode
34
LSQT0975
ª To record still pictures clearly
≥When zooming in on the subject with a
magnification of 4k or higher, it is difficult to
reduce the slight shaking from holding the
Camcorder by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
≥When recording still pictures, hold the
Camcorder firmly with your hands and keep
your arms stationary at your side so as not to
shake the Camcorder.
≥You can record stable pictures without shaking
by using a tripod and the remote control.
≥For the number of still pictures to be recorded
on a card, refer to
-86-.
≥The moving picture and sound cannot be
recorded.
≥While data are recorded on a card, do not
operate the mode dial.
≥When the access lamp is lit, do not insert or
remove a card.
≥Another product may degrade or not play back
data recorded on this Camcorder.
≥If set [PICT.QUALITY] >> [ ], mosaic-pattern
noise may appear on a playback image
depending on the picture content.
≥When the [PICTURE SIZE] is set to other than
[ ] or [ ], the mega pixel recording mode
is set.
ª
On-screen display in the card
recording mode
1) Still picture size
2) Card indication (
-72-)
3) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
4) Quality of still pictures
ª
Select the size of still pictures to be
recorded on a card
1
Set [BASIC] >> [PICTURE SIZE] >> select
the desired picture size.
ASPECT [16:9]:
: 2288k1288
: 640k360
ASPECT [4:3]:
: 2288k1728
: 1600k1200
: 1280k960
: 640k480
≥When you purchase this unit, [ASPECT] is set
to [16:9]. The sides of pictures recorded when
[16:9] is set may be cut at printing. Check before
printing.
ª
Select the picture quality for
photoshot images
1
Set [BASIC] >> [PICT.QUALITY] >> select
the desired picture quality.
[ ]: High picture quality
[ ]: Normal picture quality
≥You can also change the picture quality on
[ADVANCED] >> [PICT.QUALITY] in the tape
recording mode.
ª
Recording with a shutter operation
effect
You can add a shutter operation simulating
sound.
1 Set [ADVANCED] >> [SHTR EFFECT] >>
[ON].
ª
About the shutter chance mark
≥The shutter chance mark does not appear in
manual focus mode.
≥When the subject is not easily focused, focus on
the subject manually.
≥You can record still pictures on the card even if
the shutter chance mark does not appear, but
pictures may be recorded without being
focused.
≥The shutter chance mark does not appear or
has difficulty displaying in the following cases.
≥When the zoom magnification is high.
≥When the Camcorder is shaken.
≥When the subject is moving.
≥When the subject stands in front of a light
source.
≥When close subjects and far subjects are
included in the same scene.
≥When the scene is dark.
≥When there is a bright part in the scene.
≥When the scene is filled with only horizontal
lines.
≥When the scene lacks contrast.
0.2
0.3
M
1)
3)
4)
3
2)
3
0.2
4
M
2
M
1
M
0.3
M
LSQT0975_ENG.book 34 ページ ２００５年１２月１９日 月曜日 午前９時５１分